HomeSitemapContact Us
img

CYCLESTOP VALVES

Cycle stop valves are pump control valves that allows pumps to maintain a constant pressure for the user, regardless of the amount of water being used.  These valves are attached to the discharge of the pump and automatically restrict the output of a pump to match the user’s requirements for water. They are completely mechanical, requiring no electronics.

Using cycle stop valves allows large pumps to provide small flows without expensive controls or huge water tanks. Once equipped with a cycle stop valve, a pump can safely operate at a flow from 1gpm to its maximum flow rate.

img

    www.cyclestopvalves.com

 

img

NON-CONCUSSIVE TAPS

Self-closing, non-concussive fittings ensure that taps are turned off. A running tap can quickly waste a considerable amount of water and energy. Self-closing taps close the flow of water automatically, reducing your risks and costs. All our Eurobath Taps are also fitted with aerators which add air to the flow stream, resulting in a spray-like flow and reducing water usage, while maintaining washing effectiveness.  These devices can prevent water wastage by over 50%.

img

www.eurobath.co.uk

 

img

WATER-SAVING TOILETS

Most wastewater consists of water used for flushing toilets since regular toilets use 3 or more gallons per flush. The Water Source supplies a variety of toilets offering various degrees of water conservation features. Our Shires range of toilets offer a dual flush system where a half or full flush can be used depending on the type of waste. 

Besides conserving water, a low flush toilet can also provide added benefits such as, longer soakaway life of your septic system and more savings from having lower water bills.

 

www.shires-bathrooms.co.uk 

 

 

 

Copyright © 2008+, Watersourcett.com
About us     |     Products     |     FAQs     |     Contact Us     |      Links